Waterproofing Coating

Product Details:

Polymeric Waterproofing Chemicals
Dubond’s Hydro Crete is an acrylic emulsion which when added to cement mortar / concrete / grout provides good adhesion, water resistance and improvement of other properties. It is available in form of a milky liquid.

Hydro Crete is a high quality emulsion that substantially increases the quality of cement mortars /concrete /grout for:

• Rendering and coating
• Jointing
• Repair and adhesive mortar
• Roof finishing
• Bonding of concrete casts
• Tiling
• Waterproof rendering
• Cement injection mix

Features & Benefits:

• Extremely good adhesion
• Reduced shrinkage
• Greater elasticity
• Excellent oil and water resistance
• Increased abrasion resistance
• Improved chemical resistance
• Improved UV resistance

Method of Application:

• Concrete surfaces should be sound and clean, free from oil, grease, cement laitance & loosely adhering particles.
• Absorbent surfaces should be saturated thoroughly with water but without showing any puddle on their surfaces.

Available Packaging Size:

• 5Ltrs., 10Ltrs., 20Ltrs., 200Ltrs

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Additional Information:

• Port of Dispatch: Ahmedabad
• Delivery Time: 1 Day

Product Details:

We have established ourselves as a recognized firm, engaged in offering Terrace Waterproof Coat to our clients. Our offered Terrace Waterproof Coat in order to enhance their water resistance properties. The experienced team of our company employ ultramodern technology and make use of high grade China mosaic to render this service with utmost care and perfection in a timely manner. Apart from this, we offer this coating service at cost-effective price to our valuable clients.

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad
• Delivery Time: 1 Day
• Packaging Details: 10Kgs

Product Details:

High Resistance, Epoxy Bonding Agent. Hydro Epoxy Coatings is a thixotropic, epoxy paste system, that complies with the performance requirements for structural bonding.

Features:

• For structural bonding between pre-fabricated concrete structures and reinforced or pre-stressed
• concrete elements.
• For structural bonding of steel plates and pultruded composite plates to reinforced and pre-stressed
• concrete.
• For waterproofing inside the water tanks where hydrostatic / negative pressure exists.

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Areas of Application:

• For structural bonding between pre-fabricated concrete structures and reinforced or pre-stressed concrete elements
• For structural bonding of steel plates and pultruded composite plates to reinforced and pre-stressed concrete
• For waterproofing inside the watertanks where hydrostatic / negative preassure exists.

Method of application :
Structural bonding of prefabricated concrete structures to reinforced and prestressed concrete elements, and of steel slabs , pultruded plates and composite fabrics to reinforced and prestressed concrete elements Surface filling of cracks prior to injection of fluid mortars for structural consolidation
PreparationHydro Epoxy is prepared by mixing component A with component B (preset ratio 1 : 1 in the buckets) until a soft paste of uniform colour is obtained. Mix by hand or using a low-rev, mechanical stirring device. Workability times may vary according to the density of the mixed paste and the temperature of the environment and substrate: the higher the temperature or the larger the mixture, the lower the workability time.

Application
1.Before applying Hydro Epoxy first brush or preferably sandblast the concrete substrate to roughen and clean it, removing any remaining dust, grease, oil or other contaminants until the substrate is clean and cohesive.2. Once all rust, oil and paint has been removed, metal surfaces must be prepared to standard by first manually cleaning them or by mechanical cleaning (sandblasting) Hydro Epoxy is applied with a spreader.3. We recommend spreading Hydro Epoxy on both surfaces to be bonded, making sure the product penetrates well in more uneven parts of the substrate.4. To strengthen cracked structures by first opening the crack using a flexible joint, removing any dust under pressure into previously drilled injection holes. Subsequently, the crack can be filled wit Hydro Epoxy through injection tubes inserted into the same holes as before
 

Additional Information:

• Port of Dispatch: Ahmedabad
• Delivery Time: 1 Day
• Packaging Details: Part A 5 Kg Bucket & part B 5 Kg Bucket.

Product Details:

Terrace Waterproofing Coating is very flexible and vapour permeability. It is a cement- based water proofing with carbonation inhibiting properties. It adheres to all types of surface which provides a solution to leakage, seepage or ingress of water /moisture in concrete by sealing capillaries and shrinkage cracks in both positive and negative side of the structure. Hydro coat penetrates into pores of substrate by capillary action and is channeled to the lower depths of concrete by inherent moisture therein, including those occurring even in the smallest pores and capillaries.

Hydro Coat reacts with moisture and creates a continuous barrier of insoluble minerals as the product consists of high strength binders, selected silicon / quartz mineral charges with synthetic fibers and specific additives. The capillaries are permanently blocked to the passage of water. However, vapour may pass through allowing structure to breathe. Rate and penetration of minerals depends on presence of moisture, free lime and density of concrete.

Features & Benefits:

• Being an integral part of the concrete structures instead of merely being a surface coating or membrane that can damage or delaminate.
• Can be used on all types of substrates.
• Does not require special protection during back filling, placement of reinforcement or other procedures necessary to protect a surface type waterproofing system.
• Penetrates deep into the capillary tractys and shrinkage cracks and can seal both posoitive and negative side of concrete structure.
• Protects against water borne corrosive chemicals that can cause corrosion of reinforcement.
• Non- reacted chemicals remain active and will react in contact with water providing additional protection against leakage.
• Vapour permeability.
• Very flexible.
• With stand high and low temperature.

Available Packaging Size:

• 1Kg, 10Kg

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Additional Information:

• Port of Dispatch: Ahmedabad
• Delivery Time: 1 Day

Product Details:

Two Pack Grey Cementitious Waterproofing Coatings is a two component grey cementious & acrylic PU blend flexible water proofing & protective coating composed of best quality portland cement. Properly selected & graded aggregates dry film preservative additives of acrylic PU blend flexible emulsion polymer as a binder. It is applied to waterproof and protect concrete and similar structures. Specially formulated for swimming pools, retaining walls, pile heads, water tanks, submerged tunnels, sumps, bridge decks, marbles, granites and a wide variety of extreme service class structures because on curing it forms and excellent elastomeric, waterproof & protective layer over the substrate.

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad

Product Details:

Integral Waterproofing Compound For Concrete & Plaster. Dubond's Hydrobuild LW Power - Integral Waterproofing Compound is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation.

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Areas of Application:

•  Basements
•  Roof slabs and Screeds
•  Water tanks & water retaining structures
•  External Plastering
•  Bathrooms and Balconies
•  Sunk and Drains

Features & Benefits

•  Increases Workability
•  Easier Placing
•  Better Compaction and Finishing by acting as Viscosity Modifier
•  Lowers cement content for increase in specified Strength, Workability & Durability
•  Higher Cohesion
•  Breaks the Salinity of Water by converting them into Salt Crystals
•  Lower water requirement for given Workability
•  Chloride free
•  Increases Extra Bonding Strength
•  Reduce risk of Segregation and Bleeding
•  Reduce risk of Shrinkage Cracks due to Heat of Hydration
•  Reduce risk of Honey Combing
•  Corrosion resistant - reduces the risk of rusting of reinforcement by breaking the chain of Rust Electrons - Makes concrete more cohesive, hence protects steel better against corrosion

Method of Application

• Charge cement & aggregates to concrete mixer as per the mix design, mix in dry state for 12 minutes.
• Start addition of 75–80% mixing water & mix for 2-3 minutes.
• Hydrobuild LW is added as per the recommended dosage into the remaining mixing / gauging water,
• Then add to concrete mixer & mix for another 2 minutes.
• Place the concrete or apply plaster, as needed .
• Cure the applied mortar or concrete as per good construction practices.

Packing: 200 ml, 1ltr, 5 ltr & 20 ltr container

Shelf Life & Storage: Shelf life is 12 months from the date of manufacturing in unopened conditions. Store in a cool & dry place.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad
• Delivery Time: 1 Day
• Packaging Details: 200 ml, 1 ltr., 5 ltrs., 10 ltrs, 20 ltrs.

Product Details:

Dubond’s Hydro Coatis one pack, flexible, cement-based capillary waterproofing with carbonation inhibiting properties. It adheres to all types of surface which provides a solution to leakage, seepage or ingress of water / moisture in concrete by sealing capillaries and shrinkage cracks in both positive and negative side of the structure. Hydro coat penetrates into pores of substrate by capillary action and is channelled to the lower depths of concrete by inherent moisture therein, including those occurring even in the smallest pores and capillaries. Hydro Coat reacts with moisture and creates a continuous barrier of insoluble minerals as the product consists of high strength binders, selected silicon / quartz mineral charges with synthetic fibers and specific additives. The capillaries are permanently blocked to the passage of water. However, vapour may pass through allowing structure to breathe. Rate and penetration of minerals depends on presence of moisture, free lime and density of concrete.

Product Details:

Waterproofing Powder is a two component binder & acrylic flexible waterproofing & protective coating system composed of specialize binder cement with high performance additives & acrylic emulsion polymer. It is applied to waterproof and protect concrete and similar structures. Specially formulated for swimming pools, retaining walls, pile heads, water tanks, submerged tunnels, sumps, bridge decks, marbles, granites and a wide variety of extreme service class structures because on curing it forms and excellent elastomeric, waterproof & protective layer over the substrate

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Additional Information:

• Port of Dispatch: Ahmedabad
• Delivery Time: 1 Day
• Packaging Details: 20 packs of 500 grms, 10 packs of 1 kg

Product Details:

Integral Waterproofing Compound for Concrete. Waterproofing Compound - Integral Waterproofing Compound is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation. Hydrobuild LW is an integral waterproofing admixture for concrete and mortar which chemically converts the water soluble compounds present into concrete/mortar into stable water insoluble compounds. It is used in all types of concrete/mortar requiring water impermeability. It is based on high performance polymers. Conforms to IS 2645 : 2003 and IS 9103 – 2000 standards.

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Additional Information:

• Port of Dispatch: Ahmedabad
• Delivery Time: 1 Day
• Packaging Details: 200 ml, 1 ltr., 5 ltrs., 10 ltrs, 20 ltrs.