Waterproofing Chemical

Product Details:

Exterior Waterproofing Coatings is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings. Applicable on all types of exterior masonry surfaces, concrete, cement sand renderings, etc. Applicable also on asbestos sheets.

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Areas of Application:

• Waterproofing – Higher film thickness provides crack bridging ability, waterproofing properties.
• Flexibility – Flexible and covers hairline cracks (upto 0.5 mm) effectively, thus prevents ingress of water.
• Toughness – Tough film withstands wind driven rain.
• Elastomeric – High elasticity easily withstands stress caused by thermal expansion & contraction
• Ready to use – No dilution is required
• Microbial resistance – Resistance to fungus and algae hence maintains the aesthetic value.
• UV resistant – Resistance to UV hence coating has longer life.
• Low dirt pick up – Very low dirt pick up & can be cleaned easily hence maintains the aesthetics.
• Breathability – Permeable to water vapour.
• Ease of application – User friendly, easily applicable by brush, roller or spray.
• Non Toxic – It is Eco friendly.

Method of Application
1.Surface preparation

• All new cement-sand renderings /concrete surfaces should be allowed to age 6 to 8 weeks before surface coating.
• Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease,etc. by mechanical means such as wire brushing & shot blasting.
• Finally vacuum cleaning of all loose solids and liquids can be done, if required.
• All surface cracks up to 5 mm width should be filled up with Dubond's Acrylic Crack Filler

2. Priming

• All types of exterior masonry surfaces, concrete, cement sand renderings, etc.

3. Application

• Use Dubond's Rainshield directly from the container. Stir contents well before use.
• Apply two neat coats of Dubond's Rainshield without dilution by brush or roller at a time interval of  -6 hours.
• For enhanced protection, apply additional coat of Dubond's Rainshield on rain lashing walls, chajjas and parapet walls.
• Allow the coated surface to air cure fully for 7 days.

Coverage
3.0 to 3.5 m per litre for 2 coats.Coverage may vary depending upon the texture and porosity of the surface.
Packing1 ltr, 4 ltr, & 20 ltr.

Additional Information:

• Item Code: Rain-Shield
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad
• Packaging Details: 1 ltr., 20 ltrs. Container