Floor Hardener

Product Details:

Non Metallic Floor Hardener is quality controlled, factory blended best quality ordinary portland cement, properly selected & graded washed composed with dried aggregates, polymer, additives & special hardwearing aggregates which have been selected for abrasion and wear resistant properties as well as shape and size. These latter considerations, together with the use of high performance work ability admixtures ( Duplast SP & Duplast HP ), produces a material which is easy to trowel into the surface of fresh, wet concrete. Dutop 100 cures monolithically to provide a dense, non-porous surface which is extremely hardwearing, abrasion resistant and impact resistance of concrete floor to allow heavy duty movements. Being non-metallic, it provide extra strength and an anti-skid surface which will never get rusted and disintegrate.

Standard compliances / Specification:

• Meets the requirements of ASTM C 944, BS 1881: Part 116 ; IS 1237 : 1980

Areas of Application:

• Abattoirs
• Agricultural buildings & yards
• Desalination plants
• Distillation plants
• Heavy industry
• Laboratories
• Power stations
• Railway platforms
• Steel industries
• Warehouse floors, loading bays and workshops

Features & Benefits:

• Abrasion & Impact Resistance - High abrasion & impact resistance provides erosion resistance due to movements of
• vehicular traffic.
• Develops 80% more abrasion resistance than control concrete.
• Corrosion - Does not contain ferrous aggregate, so any rusting & erosion of floor.
• Dust resistance - Smooth & hard surface prevents dust generation due to movements.
• Ease of application - Pre-mixed powder, easy to dry shake & trowel.
• Easy and economical to apply
• Forms monolithic bond with base concrete
• Provides a hard, abrasion resistant surface Strength - Excellent compressive strength increases wear resistance of
• concrete floors.
• Uniformity - Provides monolithic bond to fresh concrete surface, so prevents joints & pothole formation.
• Water absorption - Very low water absorption because it forms dense & low permeability substrate.

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Additional Information:

• Item Code: Dutop100
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad
• Packaging Details: 25 kg HDPE Bag

Product Details:

Cementitious Floor Hardener is quality controlled, factory blended best quality ordinary portland cement, properly selected & graded washed composed with dried aggregates, polymer , additives & special hardwearing aggregates which have been selected for abrasion and wear resistant properties as well as shape and size. These latter considerations, together with the use of high performance work ability admixtures (Duplast SP & Duplast HP ), produces a material which is easy to trowel into the surface of fresh, wet concrete. Dutop 100 E cures monolithically to provide a dense, non-porous surface which is extremely hardwearing, abrasion resistant and impact resistance of concrete floor to allow heavy duty movements. Being non-metallic, it provide extra strength and an anti-skid surface which will never get rusted and disintegrate.

 

Standard compliance / Specification:

• Meets the requirements of ASTM C 944, BS 1881: Part 116 ; IS 1237 : 1980

Areas of Application:

• Agricultural buildings
• Aircraft Hangers
• Distillation plants
• Engineering workshops
• Heavy industry
• Heavy traffic areas
• Helipads
• Power stations
• Shipyards
• Warehouse floors, loading bays

 

Features & Benefits:

• Permeability - High impermeability compared to plain concrete under the same conditions.
• Wear resistance - Improves wear resistance of concrete.
• Adhesion - Forms monolithic bonds with fresh concrete & becomes an integral part of it.
• Abrasion resistance - Improves the abrasion resistance of concrete by 250%.
• Economics - Economical floor treatment improves abrasion, impact & other mechanical properties of concrete.
• Dust resistance - Improves dust generation resistance because of very smooth surface finish & hardness.
• Corrosion resistance - Non-ferrous aggregate, hence will not degrade due to rust in wet condition.
• Strength - Improves compressive strength of the treated surface.
• Ease of application - Pre-mixed powder, easy to dry shake & trowel.
• Easy and economical to apply
• Forms monolithic bond with base concrete

 

Method of Application:

• Surface Preparation: The base concrete should be of proper mix design without any floating of fine cement paste, no segregation & bleeding.

Note:

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Additional Information:

• Item Code: Dutop100E
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad
• Delivery Time: 1 Day
• Packaging Details: 25 kg HDPE Bag